Enabling The Listening Port Of The Radius Client; Displaying And Maintaining Radius - H3C S5120-EI Series Operation Manual

Follow these steps to specify a security policy server:
To do...
Enter system view
Create a RADIUS
scheme and enter its
view
Specify a security policy
server
If more than one interface of the device is configured with user access authentication functions, the
interfaces may use different security policy servers. You can specify up to eight security policy
servers for a RADIUS scheme.
If the RADIUS server and the security policy server reside on the same physical device, you do not
need to configure the IP address of the security policy server.
The specified security policy server must be a security policy server or RADIUS server that is
correctly configured and working normally. Otherwise, the device will regard it as an illegal server.

Enabling the Listening Port of the RADIUS Client

Follow these steps to enable the listening port of the RADIUS client:
Enter system view
Enable the listening port of the RADIUS
client

Displaying and Maintaining RADIUS

To do...
Display the configuration
information of a specified
RADIUS scheme or all RADIUS
schemes
Display statistics about RADIUS
packets
Display information about
buffered stop-accounting
requests that get no responses
Clear RADIUS statistics
Use the command...
system-view
radius scheme
radius-scheme-name
security-policy-server
ip-address
To do...
display radius scheme
[ radius-scheme-name ] [ slot
slot-number ]
display radius statistics [ slot
slot-number ]
display stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
reset radius statistics [ slot
slot-number ]
—
Required
By default, no RADIUS scheme is
present.
Optional
Not specified by default
Use the command...
system-view
radius client enable
Use the command...
1-29
Remarks
Remarks
—
Optional
Enabled by default
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in user
view