Display Radius Scheme - H3C s3600 series Command Manual

Description
Use the display local-server statistics command to display the RADIUS message statistics about
local RADIUS server.
Related commands: local-server.
Examples
# Display the RADIUS message statistics about local RADIUS server.
<Sysname> display local-server statistics
On Unit 1:
The localserver packet statistics:
Receive:
Discard:
Auth Receive:
Acct Receive:

display radius scheme

Syntax
display radius scheme [ radius-scheme-name ]
View
Any view
Parameters
radius-scheme-name: Name of a RADIUS scheme, a string of up to 32 characters.
Description
Use the display radius scheme command to display configuration information about one specific or all
RADIUS schemes
Related commands: radius scheme.
Examples
# Display configuration information about all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName =system
Primary Auth IP
Primary Acct IP
Second Auth IP
Second Acct IP
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
30
0
10
20
=127.0.0.1 Port=1645
=127.0.0.1 Port=1646
=0.0.0.0 Port=1812
=0.0.0.0 Port=1813
Send:
Receive Packet Error:
Auth Send:
Acct Send:
Index=0
=5
1-31
30
0
10
20
Type=extended