Nqa; Nqa Agent Enable - H3C SR6600 Command Reference Manual

nqa

Use nqa to create an NQA operation and enter NQA operation view.
Use undo nqa to remove the operation.
Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
Default
No NQA operation is created.
Views
System view
Default command level
2: System level
Parameters
admin-name: Specifies the name of the administrator creating the NQA operation, a case-insensitive
string of 1 to 32 characters excluding hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters excluding
hyphens (-).
all: Removes all NQA operations.
Usage guidelines
If the operation type has been configured for the operation, this command directly places you to NQA
operation view.
You cannot enter the operation view or the operation view of a scheduled NQA operation.
Examples
# Create an NQA operation with administrator name admin and operation tag test, and enter NQA
operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]

nqa agent enable

Use nqa agent enable to enable the NQA client.
Use undo nqa agent enable to disable the NQA client and stop all operations being performed.
Syntax
nqa agent enable
undo nqa agent enable
Default
The NQA client is enabled.
36