Display Power; Display Reboot-Type - H3C S5120-SI Series Command Reference Manual

Used Rate: 16%
Table 1-5 display memory command output description
System Total Memory(bytes)
Total Used Memory(bytes)
Used Rate

display power

Syntax
display power [ power-id ]
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display power command to display the PSU information of a device.
Examples
# Display the PSU information of the device.
<Sysname> display power
Power 0 State: Normal
Table 1-6 display power command output description
Field
Power
State

display reboot-type

Syntax
display reboot-type
Field
PSU number
PSU state:
Normal
Absent
Fault
Description
Total size of the system memory (in bytes)
Size of the memory used (in bytes)
Percentage of the memory used to the total memory
Description
1-11