Local-User Password-Display-Mode; Nas-Id Bind Vlan - H3C S5120-SI Series Command Reference Manual

Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]

local-user password-display-mode

Syntax
local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View
System view
Default Level
2: System level
Parameters
auto: Displays the password of a user based on the configuration of the user by using the password
command.
cipher-force: Displays the passwords of all users in cipher text.
Description
Use the local-user password-display-mode command to set the password display mode for all local
users.
Use the undo local-user password-display-mode command to restore the default.
The default mode is auto.
With the cipher-force mode configured:
A local user password is always displayed in cipher text, regardless of the configuration of the
password command.
If you use the save command to save the configuration, all existing local user passwords will still be
displayed in cipher text after the device restarts, even if you restore the display mode to auto.
Related commands: display local-user, password.
Examples
# Specify to display the passwords of all users in cipher text.
<Sysname> system-view
[Sysname] local-user password-display-mode cipher-force

nas-id bind vlan

Syntax
nas-id nas-identifier bind vlan vlan-id
undo nas-id nas-identifier bind vlan vlan-id
1-26