Local-User Password-Display-Mode; Messenger - H3C s3600 series Command Manual

<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]local-user 01234567891234567
New local user added.
[Sysname-luser-012345678912345~0000]

local-user password-display-mode

Syntax
local-user password-display-mode { cipher-force | auto }
undo local-user password-display-mode
View
System view
Parameters
cipher-force: Adopts the forcible cipher mode so that all local users' the passwords will be displayed in
cipher text.
auto: Adopts the automatic mode so that each local user's password will be displayed in the mode you
have set for the user by the password command.
Description
Use the local-user password-display-mode command to set the password display mode of all local
users.
Use the undo local-user password-display-mode command to restore the default password display
mode of all local users.
By default, the password display mode of all access users is auto.
If the cipher-force mode is adopted, all passwords will be displayed in cipher text even though you
have specified to display some users passwords in plain text by using the password command with the
simple keyword.
Related commands: display local-user, password.
Examples
# Specify to display all local user passwords in cipher text in whatever cases.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-user password-display-mode cipher-force

messenger

Syntax
messenger time { enable limit interval | disable }
undo messenger time
View
ISP domain view
1-18