DID-TRK (Direct Inward Dial Trunk)
Table 8-212. Test #36 Port Audit Update Test — Continued
Error
Test
Code
Result
Description / Recommendation
PASS
This test passed. Translation information was successfully updated on the
circuit pack.
1. If signaling troubles are reported (Error Types 1, 257, or 513), verify
2. Refer problem to the CO.
0
NO
The test could not relate the internal ID to the port.
BOARD
1. Verify that the board's translations are correct. Translate the board if
2. Issue the busyout board command.
3. Issue the reset board command.
4. Issue the release busy board command.
5. Issue the test board command.
555-233-143
translation for this port.
necessary.
This should re-establish the linkage between the internal ID and the port.
Continued on next page
Issue 1 May 2002
8-529