Avaya S8700 Maintenance Manual page 1289

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

DIOD-DS1 (DS1 DIOD Trunk)

Table 8-228. Test #6 NPE Crosstalk Test — Continued

Description / Recommendation

Response to the test request was not received within the allowable time period.

System resources required for this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

At least one of the following errors is found on the DS1 circuit pack:

Look for the above error types in the Hardware Error Log and follow the

procedures given in the appropriate DS1-BD or UDS1-BD maintenance

documentation for the listed error types.

The NPE of the tested port was found to be transmitting in error. This will

cause noisy and unreliable connections.

1. Replace the circuit pack.

The port is correctly using its allocated time slots. User-reported troubles on

this port should be investigated using other port tests and examining station,

trunk, or external wiring.

1281—Loss of signal

1793—Blue Alarm

2049—Red Alarm

2305—Yellow Alarm

1537—Hyperactivity

Continued on next page

Issue 1 May 2002

Troubleshooting