Avaya S8700 Maintenance Manual page 860

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance-Object Repair Procedures
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below. For example,
by clearing error codes associated with the CAMA (Channel Administration
Memory Array) test (#205), you may also clear errors generated from other tests
in the testing sequence.
Order of Investigation
Channel Administration Memory Array (CAMA) test (#205)
Playback Speech Memory Array (PSMA) test (#206)
140AY Channel Sanity Inquiry test (#222)
1.
D = Destructive; ND = Nondestructive
Channel Administration Memory Array (CAMA)
Test (#205)
This test is a memory device that stores information used to control the 140AY
device. The Angel asynchronously feeds the CAMA with the control information.
Table 8-53. Test #205 CAMA (Channel Administration Memory Array)
Test
Error
Test
Code
Result
Description / Recommendation
1000
ABORT
System resources required to run test are not available. The port may be
active on a valid call.
1. If the circuit pack is idle, retry the command at 1-minute intervals up to 5
2000
ABORT
Response to the test request was not received within the allowable time period.
See
2100
ABORT
Could not allocate the necessary system resources to run this test.
ABORT
Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
8-138
Issue 1 May 2002
times.
''Announcement Board Locked
Short Test
Long Test
Sequence
Sequence
X
X
X
X
X
Condition''.
Continued on next page
1
D/ND
ND
ND
ND
555-233-143

Advertisement

Table of Contents
loading

Table of Contents