Avaya S8700 Maintenance Manual page 1285

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

DIOD-DS1 (DS1 DIOD Trunk)

Error Log Entries and Test to Clear Values

Table 8-226. DS1 DIOD Trunk Error Log Entries

Associated Test

Port Audit and

Update test (#36)

busyout trunk

DS1 CO Dial Tone

Seizure test (#314)

DS1 CO Dial Tone

Seizure test (#314)

DS1 CO Dial Tone

Seizure test (#314)

Conference Circuit

NPE Crosstalk test

Port Audit and

Update test (#36)

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate

test's description, and follow its recommended procedures.

This alarm is only raised when the System-Parameter Country form has the Base Tone Generator field set

to 4 (Italy). This alarm will be a MINOR alarm unless 75% or more trunks in this trunk group are out of service,

then the alarm will be upgraded to a MAJOR alarm.

Major alarms may be downgraded to Warning alarms based on the value used in the set options command.

Issue 1 May 2002

Test to Clear Value

test trunk grp/mbr

release trunk grp/mbr

test trunk grp/mbr>

test trunk grp/mbr r 2

test trunk grp/mbr l r 4

test trunk grp/mbr l r 3

test board UUCSS l

Troubleshooting