Avaya S8700 Maintenance Manual page 1606

Maintenance-Object Repair Procedures
Error Log Entries and Test to Clear Values
Table 8-336. General-Purpose Tone Detector Port (CPTR) Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1 17664 Tone Detector Audit/
Update test (#43)
18 0 busyout port UUCSSpp
130 (d) None
257 (b) 17666 Tone Detector Audit/
Update test (#43)
513 (c) Any Tone Detection
Verification test (#42)
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
Notes:
a. A Major or a Minor alarm may be logged with this error. A Major alarm is
raised when the total number of GPTD ports currently in service is less
than or equal to 1/2 of the threshold number administered via the change
system-parameters maintenance command. Otherwise, a Minor alarm is
raised. In either case, run the short test sequence on the alarmed GPTD
port and follow procedures for the individual test results.
b. The GPTD port lost its translation. Testing the GPTD port is sufficient to
reload its translation. If testing the GPTD port does not clear the error, then
replace the Tone Detector circuit pack containing the defective GPTD port.
c. This error indicates the GPTD port is having problems detecting
call-progress tones. If this error is logged constantly, replace the Tone
Detector circuit pack containing the defective GPTD port.
d. This Error Type indicates that the circuit pack has been removed or has
been insane for at least 11 minutes. To clear the error, reinsert or replace
the circuit pack.
8-884 Issue 1 May 2002
Alarm On/Off
Level Board Test to Clear Value
Any Any test port UUCSSpp sh r 1
MAJOR ON test port UUCSSpp r 2
MINOR (a)
WARNING ON release port UUCSSpp
WARNING ON test port UUCSSpp sh r 2
MAJOR ON test port UUCSSpp r 3
MINOR (a)
MAJOR ON test port UUCSSpp r 3
MINOR (a)
Continued on next page
555-233-143