Clsfy-Pt (Call Classifier Port) - Avaya S8700 Maintenance Manual

CLSFY-PT (Call Classifier Port)

CLSFY-PT (Call Classifier Port)
MO's Name (in
Alarm Log)
1
CLSFY-PT
CLSFY-PT
CLSFY-PT
1. UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot where the circuit pack resides (01–21).
pp is the 2-digit port number (01, 02, 03 ...).
The TN744 Call Classifier is a service circuit pack that provides specialized tone
detection capabilities to support the Outbound Call Management (OCM) and
Inbound Call Management (ICM) features. The TN744 supports both A-law and
Mu-law companding.
The TN744 has eight ports (CLSFY-PTs), each capable of supporting call
classification, touch-tone reception and MFC-tone generation and detection. The
CLSFY-PT MO implements a set of tests designed to ensure proper operation of
the Call Classifier.
Error Log Entries and Test to Clear Values
Table 8-175. Call Classifier Port (CLSFY-PT) Error Log Entries
Error Aux
Type Data Associated Test
1 any Tone Detector
Audit/Update test (#43)
18 busyout port
257(b) 17666 Tone Detection Audit
Update test (#43)
513(c) any Tone Detection Verification
test (#42)
555-233-143
Alarm
Level Initial Command to Run
MAJOR test port UUCSSpp sh
MINOR test port UUCSSpp sh
WARNING test port UUCSSpp sh
Alarm
Level
MAJOR/
MINOR(a)
WARNING
MAJOR/
MINOR(a)
MAJOR/
MINOR(a)
1
Full Name of MO
Call Classifier Port
Call Classifier Port
Call Classifier Port
On/Off
Board Test to Clear Value
ON test port UUCSSpp r 2
OFF release port
UUCSSpp
ON test port UUCSSpp r 3
ON test port UUCSSpp r 3
Issue 1 May 2002 8-429