Avaya S8700 Maintenance Manual page 1508

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

r. Error Type 3842—Indicates that the test that queries the EI for the state of

the lock to the system clock has failed. This means that a loss of lock

condition is present.

s. The counter associated with Error Types 3841 and 3842 is cleared when

the query for the state of the clock-to-system-clock passes. Once the

alarm is raised, this test is run every five minutes. However, the test is not

part of any sequence that can be run on demand. See previous Note "p"

for repair procedure.

t. Error Type 10001 is a report that the EI circuit pack dropped one control

message to the PN. This condition may have been observed as a call that

did not complete correctly. No system technician action is required.

System Technician-Demanded Tests:

Descriptions and Error Codes

Always investigate tests in the order presented in

example, by clearing error codes associated with the Expansion Interface Reset

test (#336), you may also clear errors generated from other tests in the testing

Table 8-302. System Technician-Demanded Tests: EXP-INTF

Order of Investigation

Expansion Interface Reset test (#336)

Expansion Interface Fiber Out-of-Frame Query

Expansion Interface Lightwave Transceiver

Looparound test (#242)

Expansion Interface Control Channel test

Expansion Interface Neighbor Query test (#237)

Expansion Interface Local Looparound test

Expansion Interface 2-way Transmission test

Expansion Interface Packet Interface test

D = Destructive, ND = nondestructive

Issue 1 May 2002

Continued on next page

Troubleshooting