Inads (Inads Link) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

INADS (INADS Link)

MO's Name (in

The INADS Link MO represents the software and communications link used by

the switch to call an alarm receiver. The purpose of the INADS Link MO is to:

Check the communications link between the system and the alarm receiver

Verify that the alarm notification process works correctly

To verify that alarms will be reported to the alarm receiver, either a centralized

technician can remotely test the process, or an on-site technician can test the

connection either during an installation or a subsequent service call.

Although the INADS Link MO never alarms, its errors are logged, and these errors

are only logged by issuing the test inads-link command.

Error Log Entries and Test to Clear Values

The Hardware Error Log entries are described as part of the following INADS Link

test description.

System Technician-Demanded Tests:

Descriptions and Error Codes

The test inads-link command is different from other test commands in that the:

Command does not have a long or short option

Resulting test does not have an associated test number.

When a user issues the test inads-link command, the system immediately

returns either the "Command successfully completed" or "Command failed"

Initial SAT Command to

test inads-link

Full Name of MO

Issue 1 May 2002