Avaya S8700 Maintenance Manual page 1473

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

ETH-PT (Control LAN Ethernet)
Link Integrity Inquiry Test (#1282)
This nondestructive test queries the C-LAN Ethernet port's physical
connections.
If:
C-LAN connection is present,
C-LAN connection is absent,
There is no response,
Table 8-294. Test #1282 Link Integrity Inquiry Test
Error
Test
Code
Result
Description / Recommendation
1124
ABORT
Ethernet link is not enabled.
1. Verify that the Ethernet link is enabled (status port UUCSSpp, status link
2. If the link is not enabled, enable the link (change data-module).
3. Repeat the test.
4. Escalate if the problem persists.
1125
ABORT
Ethernet link not in service.
1. Verify whether Ethernet link is in service (status port UUCSSpp or status
2. If the Ethernet link is not in service, release the link (release link n or
3. Repeat the test.
4. Escalate if the problem persists.
1959
ABORT
Downlink message error.
1. Retry the command at 1-minute intervals, up to 3 times.
2. Escalate if the problem persists.
2012
ABORT
Internal system error.
1. Retry the command at 1-minute intervals, up to 3 times.
2. Escalate if the problem persists.
2100
ABORT
Could not locate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. Escalate if the problem persists.
555-233-143
Then the test:
Passes.
Fails.
Aborts.
n, or display data-module).
link n).
release port UUCSSpp).
Continued on next page
Issue 1 May 2002
8-751

Advertisement

Table of Contents
loading

Table of Contents