Avaya S8700 Maintenance Manual page 1221

DC-POWER (Single-Carrier Cabinet Environment)
If a Carrier Port Power Supply is physically removed from a carrier in a
single-carrier cabinet, there will not be a DC-POWER alarm. DC-POWER
maintenance cannot distinguish between removal of the power supply and the
physical absence of the cabinet.
There is a nominal power holdover of .25 second in an PN single-carrier cabinet.
Hardware Error Log Entries and Test to Clear
Values
Table 8-202. Single-Carrier Cabinet Power Error Log Entries
Error Aux
Type Data Associated Test
2
0 0 Any
513 0 or 1 ''Single-Carrier Cabinet
Power Query Test (#79)''
1. UU is the universal cabinet number indicated in the
2. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
555-233-143
Alarm On/Off
Level Board Test to Clear Value
Any Any test environment UU
MAJOR ON test environment UU r 2
PORT
field of the Alarm Log.
Issue 1 May 2002
1
8-499