Avaya S8700 Maintenance Manual page 996

Maintenance-Object Repair Procedures
ATM-TRK-related commands
Table 8-118
errors and alarms.
Table 8-118. ATM CES troubleshooting commands
Command
display circuit-packs cabinet
display atm ports UUCSSppp
list configuration atm
list configuration trunks
busyout/release atm signaling-group
status atm signaling-group
status trunk-group
Error Log Entries and Test to Clear Values
Table 8-119. ATM-TRK Error Log entries
Error Aux
Type Data
0 0
1(a)
18(b) 0
23(c) 0
125(d)
257(e) Any
8-274 Issue 1 May 2002
lists some commands that can be useful in troubleshooting ATM
Description
Shows the circuit packs in the cabinet, identifying ATM
trunk as well as ATM-EI boards. "ATM Interface" boards
have not been administered as CES or PNC.
Shows the 256 ports on the ATM board with the
corresponding signaling and trunk group.
Lists the ATM boards, identifying equipment location,
board code, type, and vintage.
Lists boards identifying assigned ports. While the ATM
board is listed, the 256 ports are not.
Busyout or release of an ATM signaling group within a
trunk group.
Show current status of an ATM signaling group.
Shows status of the trunk group (ATM signaling groups
are part of trunk groups).
Associated Test
Any
None
busyout board UUCSS
None
None
Control Channel Loop
test (#52)
Continued on next page
Alarm On/Off
Level Board Test to Clear Value
Any test board UUCSS
MIN ON
MIN ON release board UUCSS
MIN ON
MIN ON
MIN ON test board UUCSS r 2
Continued on next page
555-233-143