Avaya S8700 Maintenance Manual page 1598

Maintenance-Object Repair Procedures
get boot-image 1C07
Image 1
Board Type: TN2501
FW Vintage: 02
HW Signature: 02
Suffix: A
Date: 03/02/02
Timestamp: 10:30:50
CRC Checksum: Good
Active Image: Yes
Reboot Image: Yes
Screen 8-6. Display Firmware Image(s) screen
4. Ensure that both the Active Image and the Reset Image fields are Yes for
Image 2.
Error Log Entries and Test to Clear Values
Table 8-332. FW-DWNLD Maintenance Error Log Entries
Error
Type Aux Data
257(a) See
associated
note
258(b) See
associated
note
259(c) See
associated
note
513(d) See
associated
note
796(e) See
associated
note
8-876 Issue 1 May 2002
DISPLAY FIRMWARE IMAGE(S)
Image 2
TN2501
02
02
A
03/02/01
12:42:18
Good
No
No
NOTE:
The firmware image filename (the file that you downloaded to the
TN2501AP circuit pack) does not appear on this screen. Ensure that
you have copied the correct file to the circuit pack and have set the
proper firmware image file (set boot-image).
Alarm
Cause Of Error Level
Download MINOR
failure
Download MINOR
failure
Download MINOR
failure
Download MINOR
failure
Firmware MINOR
download
request
On/Off
Board Test to Clear Value
OFF test firmware download
UUCSS
OFF test firmware download
UUCSS
OFF test firmware download
UUCSS
OFF test firmware download
UUCSS
OFF test firmware download
UUCSS
555-233-143