Avaya S8700 Maintenance Manual page 1474

Maintenance-Object Repair Procedures
Table 8-294. Test #1282 Link Integrity Inquiry Test — Continued
Error Test
Code Result Description / Recommendation
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals, up to 3 times.
2. Escalate if the problem persists.
FAIL Link integrity lost due to problem with attachment of Ethernet cable to the port.
1. Repeat the test.
2. If the test fails, verify that the cable properly is secured to Ethernet port and
3. Verify the C-LAN circuit pack's link integrity LED is glowing.
4. Retry the test.
5. If problem persists, see Ethernet Local Loop-around test (#1278) repair
PASS The Ethernet Link Integrity test (#1282) detects good connections.
Session Status Test (#1286)
This nondestructive test determines the status of every Ethernet port session.
This test queries the system software on port session status.
If the system software indicates that:
Every port session is up (ALL UP)
Some port sessions are up (SOME UP)
Every port session is down (ALL DOWN)
8-752 Issue 1 May 2002
to the bus.
procedures.
Continued on next page
Then the switch:
Raises no alarm, or retires alarm
Raises WARNING alarm
Raises MINOR alarm
555-233-143