Avaya S8700 Maintenance Manual page 1594

Maintenance-Object Repair Procedures
Firmware Download Procedure
Use this procedure to upgrade the firmware image file on the TN2501AP circuit
pack.
NOTE:
The commands associated with downloading firmware require that the
Administer Features field is y on the Command Permissions Categories
screen (change permissions login).
Instructions
1. Ensure that the FTP session is set up properly.
2. At the FTP client type cd / and press
This command moves you from the announcement directory (default for
FTP sessions) to the root directory (/) where firmware and other files are
located.
3. FTP the new firmware image file to the TN2501AP circuit pack using the
put command. The file extension on the firmware image filename is
required.
4. Ensure that the file is present by listing the contents of the root directory (/)
on the VAL circuit pack.
5. At the SAT, type change firmware download and press
The Firmware Download screen
change firmware download
Source Board Location:
Firmware Image File Name:
Target Board Code:
Schedule Download? y
Start Date/Time:
Target Target
Location Location
1.1b03 11.
2. 12.
3. 13.
4. 14.
5. 15.
6. 16.
7. 17.
8. 18.
9. 19.
10. 20.
Screen 8-3. Firmware Download screen
8-872 Issue 1 May 2002
FIRMWARE DOWNLOAD
1b03
/firmware_file
TN2501 Suffix:
Remove Image File After Successful Download? y
/ / : Stop Date/Time:
Target
Location
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
.
return
(Screen 8-3) appears.
Page 1 of 1
AP Firmware Vintage:
/ /
Target Target
Location Location
31. 41.
32. 42.
33. 43.
34. 44.
35. 45.
36. 46.
37. 47.
38. 48.
39. 49.
40. 50.
.
return
Server (SPE) A
:
555-233-143