E-Dig-Sta (Emulated Digital Line) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

E-DIG-STA (Emulated Digital Line)

MO's Name (in

Where UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC); C is the

carrier designation (A, B, C, D, or E); SS is the address of the slot in the carrier where the circuit

pack resides (1 – 21); and pp is the 2-digit port number (01, 02, 03, ...).

There are 4 tests in the Emulated Digital Line station maintenance test sequence

and only one test path in the test sequence. Once the test sequence begins,

every test in the test sequence is executed.

E-DIG-ST maintenance monitors and tests ports on the TN800 MAPD circuit pack

and the hardware connected to those ports for lines administered as a digital

station. These include stations with an emulated digital voice terminal and

stations with an emulated digital voice terminal and a linked data module.

Stand-alone data modules and data adaptors in stand-alone mode are not

supported by the TN800 circuit pack. Circuit pack maintenance is covered by

Issue 1 May 2002

Initial SAT Command to

test port UUCSSpp l

test port UUCSSpp sh

Full Name of MO

Emulated Digital St.