Avaya S8700 Maintenance Manual page 1742

Maintenance-Object Repair Procedures
Initialization and Periodic Checking
When the switch initializes and hourly after that, the system checks every License
file parameter.
a result of these periodic checks and the associated License-Error and
No-License modes.
Within the License file is the feature mask, an information set that controls which
features are enabled or not on the Customer Options and Special Applications
forms. Each of the approximately 150 feature mask entries is one of three types
(examples in parentheses):
Type I — features with a simple on/off state (DCS Call Coverage)
Type II — features with an alphanumeric setting values associated with
them (Logged-in ACD Agents)
Type III — includes the product ID (license serial identification number),
release number, and capacities. Type III features cannot be changed by
any login under any circumstances. (IP Telephones, IP Softphones, IP
Agents, and R300 Remote Office phones).
Table 8-403. Error messages indicating a change of mode
If the system goes And reports this error
into this mode message
No-License License File is Missing or
Corrupted
No-License The License has Expired
No-License Software Version Mismatch
No-License Offer Category Mismatch
8-1020 Issue 1 May 2002
Table 8-403 shows the error messages that you can encounter as
It means that
License could not be decrypted.
Checksum did not match, data possibly lost.
Mismatched settings:
Offer Category
Version
Call Center Release
Model
Min. and Max. values of "* and # in vector
collect step" do not match the License file.
IP product defined in translations but not
defined in the License file.
The license has expired.
The current software version does not match
the software version in the License file.
The Offer Category in translation does not
match the Offer Category in the License file.
Continued on next page
555-233-143