Avaya S8700 Maintenance Manual page 874

Maintenance-Object Repair Procedures
Table 8-57. ASAI Cause Values — Continued
Code Explanation
63 Service or
option not
available
65 Bearer service
not
implemented
69 Requested
facility not
implemented
79 Service or
option not
implemented
81 Invalid CRV
87 Internal switch
audit
8-152 Issue 1 May 2002
Recommendation
Requested ASAI capability or resource is not available on the switch or
adjunct. More than one adjunct may be contending for the same switch
resource. Potential administration mismatch between the resource
domains administered on the switch and those administered on the
adjunct.
1. Verify that no overlapping administration of switch resources (for
example, requesting notifications on a single domain by multiple
adjuncts attempting to control a single call) exists across any
adjunct connected to the switch. If an overlap exists, then
re-administer the adjuncts to ensure that each adjunct is associated
with a unique set of switch resources.
Requested service not implemented in switch or endpoint.
Requested service not supported in switch or endpoint.
1. Consult switch and endpoint documentation to determine service
support.
Requested service or option (or combination of selected options) is not
supported (implemented) in switch or the adjunct.
1. Consult switch and adjunct documentation to determine ASAI
service and options supported by both switch and adjunct.
Re-administration of the switch-administered capabilities (see
Customer Optional Feature form) or those of the adjunct may be
necessary to correct the problem.
An invalid CRV was sent by the adjunct.
1. This may indicate a CRV inconsistency between the switch and the
adjunct. See the CallVisor protocol reference manual.
There is an inconsistency in switch data records.
1. There is no action needed, since the switch has corrected the data
inconsistency.
Continued on next page
555-233-143