Avaya S8700 Maintenance Manual page 914

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

Table 8-80. ATM-EI Error Log Entries — Continued

Associated Test

Expansion Interface Lock

Query test (#304)

Packet interface test

Expansion Interface 2-way

Transmission test (#241)

ATM Board DSP test

LANHO critical error

ATM Framer Looparound

test (#1260)

ATM Framer Looparound

test (#1260)

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate

test's description, and follow its recommended procedures.

Aux Data 32767 for any error log entry indicates that an alarmed ATM-EI was busied out and then released.

When this occurs, existing service-affecting alarms must be preserved. Typically, every alarm is resolved when

the ATM-EI is released. Therefore, the Alarm and Error Logs must be repopulated with the alarms present at

time of busyout. This Aux Data indicates that existing Error Type and Error Log time stamps are no longer valid

because they were lost when the circuit pack was released.

Issue 1 May 2002

Test to Clear Value

test board UUCSS r 4

test board UUCSS r 4

test board UUCSS r 2

test board UUCSS r 3

test board UUCSS

test board UUCSS

test board UUCSS l

test board UUCSS l

Continued on next page

Troubleshooting