Avaya S8700 Maintenance Manual page 819

ANL-LINE, ANL-NE-L (8-Port Analog Line)
Table 8-37. Test #47 Loop Around and Conference Test — Continued
Error Test
Code Result Description / Recommendation
PASS The port is able to provide an analog transmission path to the station
equipment. User-reported troubles on this port should be investigated by using
other port tests, by examining station wiring, by examining the station, and by
ensuring that the terminal is correctly translated as off-premises or
on-premises.
0 NO The test could not relate the internal ID to the port (no board). This could be
BOARD due to incorrect translations, no board is inserted, an incorrect board is
inserted, or an insane board is inserted.
1. Verify that the board's translations are correct. Use the list config
2. If the board was found to be correctly inserted in step 1, issue the busyout
3. Issue the reset board command.
4. Issue the release busy board command.
5. Issue the test board long command.
555-233-143
NOTE:
This test always passes for circuit packs TN712 prior to vintage 14 and
TN742 prior to vintage 6.
command, and resolve any problems that are found.
board command.
This should re-establish the linkage between the internal ID and the port. If
not, dispatch to verify that a valid board is inserted.
Continued on next page
Issue 1 May 2002 8-97