Avaya S8700 Maintenance Manual page 804

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

Hardware Error Log Entries and Test to Clear

Table 8-33. 8-Port Analog Line Error Log Entries

Associated Test

Audits and Updates

busyout station

Station Present test

Battery Feed test

Loop Around and

Conference test

NPE Crosstalk test

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate

test's description, and follow its recommended procedures.

Minor alarms on this MO may be downgraded to Warning alarms based on the values used in the set options

a. These are in-line errors that can only be resolved over time.

Aux Data 40960 Indicates that too many simultaneous incoming ringing

attempts were made on this board. Only 4 ports on a board may ring

simultaneously. A 5

Aux Data 40975 indicates that the terminal equipment was on-hook when

ring-tip was detected during ringing. This usually indicates a failure in the

terminal equipment or the type of terminal has a low ringer impedance.

Issue 1 May 2002

incoming call will cause an inline error from the

Test to Clear Value

test port UUCSSpp sh r 1

release station extension

test port UUCSSpp sh

test port UUCSSpp sh r 3

test port UUCSSpp sh r 2

test port UUCSSpp l r 3

Troubleshooting