Avaya S8700 Maintenance Manual page 1666

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

Short IP 2-Way Transmission Test (#1505)

This test is a non-destructive test.

Short IP 2-way transmission test is run for the periodic, scheduled, analysis and

short demand tests.

This test attempts to verify IP network connectivity between one pair of IP Media

processors that are connected to the customers LAN/WAN IP network.

This test creates a G.711 audio path between the source IP Media processor

board specified in the command line and a destination IP Media processor board.

The destination media processor board is chosen by the system. The destination

media processor is chosen from a port network other than the port network

containing the source media processor. In addition, the destination media

processor board is chosen from the same IP network region as the source media

processor board or is chosen from an IP network region that is administered to be

connected to the IP network region of the source media processor board.

An audio channel using G.711 is setup between both boards. A 1004-Hz test tone

is transmitted from the source PN to the destination PN over the G.711 audio

channel. The test tone is then transmitted from the destination PN to the source

Issue 1 May 2002

Troubleshooting