Avaya S8700 Maintenance Manual page 1741

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

LIC-ERR (License-Error Mode)
Table 8-402. Error messages and repair procedures
License Mode
Description
License-Normal
No mismatches between
license and switch; stable
running condition
License-Error
Warning mode; Avaya
MultiVantage ™ software
supported, 6-day
countdown timer begins.
No-License
Outgoing and incoming
calls only to administered
emergency numbers.
555-233-143
Explanation and repair procedure
None needed
If you initially log into the SAT and you get a
message that says:
License-Error:
xxxxx; Call Processing Will Be
Blocked in Approximately X hours,
the 'xxxx' tells you why you are in License-Error
mode, and Avaya MultiVantage ™ software
functions normally for 'X' hours, at which time the
system goes into No-License mode.
One of the following conditions is present:
Reference IPSI not responding.
The License file has expired.
Feature usage does not match the License file.
Clear the License-Error mode by
Correcting the error or mismatch that caused going
into this mode.
Installing a valid License file that is consistent with
the switch.
If you initially login to the SAT and get a message
that says:
No-License:
Processing Blocked
you are in No-License mode, and no call processing
is allowed. Calls in progress continue, but every
new origination is denied.
One of the following conditions is present:
No License file is installed in the system.
The License-Error timer expired.
Clear No-License mode by:
Correcting the error or mismatch that
caused going into this mode.
Installing a valid License file that is
consistent with the switch parameters.
Issue 1 May 2002
xxxxx; Call
, the 'xxxx' tells you why
Continued on next page
8-1019

Advertisement

Table of Contents
loading

Table of Contents