Ann-Pt (Announcement Port) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

ANN-PT (Announcement Port)

MO's Name (in

UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC). C is the carrier

designation (A, B, C, D, or E). SS is the number of the slot where the circuit pack resides (01–21).

pp is the 2-digit port number (01, 02, 03 ...).

There are 16 announcement ports on the announcement circuit pack. Each port

can play any integrated announcement, independently of the other ports. In

addition to the 16 ports, the announcement circuit pack also has one data line

circuit port (Port 17). The data line circuit port is used for uploading/downloading

the announcement memory to/from the system removable media or disk devices.

If there are any errors associated with Port 17, see

maintenance information. If there are any errors associated with the circuit pack,

''ANN-BD (Announcement Circuit Pack)''

Essential Service Information

There are a number of important basic principles that should be understood

before undertaking work on the announcement circuit pack. These are described

''Essential Service Information'' on page 8-120

Although announcement port 5 and data line circuit port 17 on the announcement

circuit pack are logically two separate ports, they are physically the same port.

Therefore, if one of the ports is active, the other one will be busy. Also, if

announcement port 5 is out-of-service, the data line circuit port will be taken

out-of-service. However, if the data line circuit port is out-of-service, the

announcement port will remain in-service.

Issue 1 May 2002

Initial Command to Run

test port UUCSSpp l

test port UUCSSpp l

Full Name of MO

Announcement port

''DAT-LINE (Data Line Port)''

maintenance information.

of the "ANN-BD"MO.