Asai-Bd (Multi-Application Platform Board) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance-Object Repair Procedures

ASAI-BD (Multi-Application Platform

MO's Name (in

Where UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC); C is the

carrier designation (A, B, C, D, or E); SS is the address of the slot in the carrier where the circuit

pack resides (01 to 21); and pp is the 2-digit port number (01, 02, 03, ...).

Maintenance testing of the common circuit pack is handled by on-board firmware

and server-controlled tests. Maintenance software queries the firmware for error

and alarm information, status, and test results. Firmware automatically reports

error conditions that result in server-controlled testing.

For MAPD board insertion, the switch makes an additional board query if any of

the following circuit packs are inserted:

Circuit Pack

For any of the previous initial board uplinks, the switch queries the board for

administration data as well as reporting the switch software release and the

system type.

Issue 1 May 2002

Initial Command to

test board UUCSS pp

test board UUCSS pp

80 or greater

Full Name of MO

Troubleshooting