Avaya S8700 Maintenance Manual page 899

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

ATM-BCH (ATM B-Channel Trunk)
Table 8-72. Test #256 Service State Audit Test — Continued
Error
Test
Code
Result
Description / Recommendation
1116
ABORT
Trunk not in Out-of-Service/Far-end state and country protocol other than 1
1117
ABORT
Service-state audit message outstanding
1. Wait 2 minutes, then try again.
2100
ABORT
Could not allocate needed resources
1. Retry the command up to 5 times at 1-minute intervals.
1113
FAIL
Signaling link failed
1. See the
FAIL
Internal system error
1. Retry the command up to 5 times at 1-minute intervals.
PASS
1. Wait 4 minutes, then check the Error Log for any new Error Type 3073.
555-233-143
''ATM-SGRP (ATM Signaling Group)''
Signaling Link Port)''
MOs.
If there are none, both sides of the ISDN connection agree on
the service state. The negotiation succeeded.
If there is a new 3073 error, then the negotiation failed (the
request timed out).
and
''ISDN-LNK (ISDN-PRI
Continued on next page
Issue 1 May 2002
8-177

Advertisement

Table of Contents
loading

Table of Contents