Avaya S8700 Maintenance Manual page 1652

Maintenance-Object Repair Procedures
Error Log Entries and Test to Clear Values
Table 8-359. DS1 Interface Circuit Pack Maintenance Error Log Entries
Error Aux
Type Data Associated Test
1
0 0 Any
1(a) 0 Circuit pack removed or
SAKI test (#53)
18(b) 0 busyout board UUCSS
23(c) 0 Board administered but not
inserted
125(d) none Wrong board
257(e) 65535 Control Channel Loop test
(#52)
513(f) 4352 TN2302 On board hardware
4353 errors
4355
4356
4358
769(g) 2-Way Transmission tests
(#1505 & 1506)
1025(h) Any FPGA Query test (#1406)
1281(i) Any TSI Health Query test
(#1406)
1538(j) Any Circuit pack is hyperactive
1793 Any NIC Loss Of Signal
2049(k) Any PPC Sanity Query test
(#1406)
2305(l) Any IP Address Update
2561(m) Ping error
2817(n) Any Ethernet Hardware Query
test (#1406)
3073(o) Any Circuit pack reset test (#53)
3840, Inconsistent downlink or
3841(p) board error
3999(q) Any None
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
2. Minor alarms on this MO may be downgraded to warning alarms based on values set in the set options
command.
8-930 Issue 1 May 2002
Alarm On/Off
Level Board Test to Clear Value
Any Any test board UUCSS
MIN/WRN OFF
WARNING OFF release board UUCSS
WARNING OFF add ds1 UUCSS
MINOR ON
MINOR ON test board UUCSS l r
20
MINOR ON
MINOR OFF
MINOR
MINOR ON
MIN/ test board UUCSS l r 2
2
WRN
555-233-143