Avaya S8700 Maintenance Manual page 1603

FW-DWNLD (Firmware Download)
Table 8-335. Test #1413Firmware Download Test — Continued
Error Test
Code Result Description / Recommendation
1 FAIL The firmware image file entered on the change firmware download screen is
absent from the source board specified in the screen:
Execute the list directory command to verify that a file system is enabled on
the board and that the file is present.
If the file system is not enabled, execute the enable filesystem command and
FTP the correct firmware image to the source board. If the correct image file is
present, then the name entered on the screen is incorrect.
Execute the change firmware download command and enter the correct file
name.
2 FAIL The image file header on the source board is invalid.
FTP a good firmware image file to the source board
3 FAIL Firmware image file on the source board has a bad CRC.
FTP a good firmware image file to the source board.
4 FAIL Firmware image file name is too long.
Rename the image file to a file name of the correct size.
FTP the new image file to the source board.
Execute the change firmware download command and enter the new file
name on the screen.
5 FAIL The TN code of the firmware image file on the source board does not match the
TN code entered on the screen. The firmware file is incorrect for the board type
entered on the screen.
Execute the list directory command and verify that a file system is enabled on
the board and the file is present.
If the file system is not enabled, execute the enable filesystem command and
FTP the correct firmware image to the source board.
Execute the change firmware download command and enter the new file
name on the screen.
6 FAIL The suffix of the firmware image file on the source board does not match the
suffix entered on the screen. The firmware image file is incorrect for the board
types entered on the screen.
Execute the list directory command and verify that a file system is enabled on
the board and the file is present.
If the correct firmware image is absent, FTP the correct firmware image to the
source board.
Execute the change firmware download command and enter the new file
name on the screen.
555-233-143
Continued on next page
Issue 1 May 2002 8-881