Avaya S8700 Maintenance Manual page 897

ATM-BCH (ATM B-Channel Trunk)
Signaling Link State Audit Test (#255)
This nondestructive test checks the status of the TN230x ATM-CES Interface
circuit pack and the ATM D-channel (ATM-DCH) trunk, which are both important
elements to the health of the ATM-BCH trunk.
Table 8-71. Test #255 Signaling Link State Audit Test
Error Test
Code Result Description / Recommendation
None ABORT Internal system error
0 ABORT
1114 ABORT Signaling link in transitional state
1. Retry the command up to 5 times at 1-minute intervals.
1018 ABORT Maintenance disabled
1. Enable maintenance. Enter y in the
4 FAIL Signaling channel problem
1. Look for errors or alarms against the
8 FAIL TN230x circuit pack failed
1. See the
PASS Signaling link OK.
555-233-143
page 2 of the change trunk-group form.
and ''ATM-DCH (ATM D-Channel Port)''
''ATM-INTF (TN2305/6)''
Maintenance Tests?
''ATM-SGRP (ATM Signaling Group)''
MOs.
MO.
Continued on next page
Issue 1 May 2002
field on
8-175