Avaya S8700 Maintenance Manual page 1177

CO-TRK (Analog CO Trunk)
Table 8-183. CO Trunk Error Log Entries — Continued
Error Aux
Type Data Associated Test
1537 Dial Tone test (#0)
1793 Looparound and
Conference test (#33)
2049 NPE Cross Talk test
(#6)
2561 (d) 57345 None
2817 (a) 57360 None
2817 (a) 57393 None
2817 (d) 57484 Dial Tone test(#0)
3073 (d) 57376 None
3329 (d) 57408 None
3329 (d) 57484 Dial Tone test (#0)
3585 (d) 57424 None
3840 (f) 8000 Transmission tests
(ATMS)(#844-848)
3841 (f) Transmission tests
(ATMS)(#844-848)
1. Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate
test's description, and follow its recommended procedures.
2. Major alarms may be downgraded to Warning alarms based on the value used in the set options command.
Notes:
a. These are in-line errors that have no specific test associated with them.
Refer to the following table for an explanation and appropriate action.
b. This is a software audit error that does not indicate any hardware
malfunction. Run short test sequence, and investigate associated errors.
c. This error type indicates that the circuit pack has been removed or has
been insane for at least 11 minutes. To clear the error, reinsert or replace
the circuit pack.
555-233-143
Alarm On/Off
Level Board
MAJOR OFF
MINOR
2
WARNING
MAJOR ON
MINOR
2
WARNING
MAJOR ON
MINOR
2
WARNING
MAJOR OFF
MINOR
WARNING
MAJOR OFF
MINOR
WARNING
OFF
MINOR OFF
Issue 1 May 2002
Test to Clear Value
test port UUCSSpp l r 2
test port UUCSSpp l r 3
test port UUCSSpp l r 3
test port UUCSSpp l r 1
test port UUCSSpp l r 1
test analog-testcall
test analog-testcall
Continued on next page
8-455