Avaya S8700 Maintenance Manual page 1558

Maintenance-Object Repair Procedures
Expansion Interface Neighbor Query Test (#237)
This test is nondestructive. The Expansion Interface Neighbor Query test is a
request to an EI circuit pack to determine whether it has established
communication with the EI or SNI circuit pack at the opposite end of the fiber.
For EI-to-EI fiber links, this test is run on both EI circuit pack endpoints of the fiber
link.
Table 8-324. Test #237 Expansion Interface Neighbor Query Test
Error Test
Code Result Description / Recommendation
1033 ABORT The EI circuit pack does not have a fiber link administered to it. There is not
sufficient data to run test. Since the test fiber-link command was run, the
expansion interface should be administered on a fiber link, therefore this must
be a software problem.
2000 ABORT Response to the test request was not received within the allowable time period.
1. Run the test board UUCSS test separately for each EI endpoint on this
2031 ABORT The attempt to send the message to the EI circuit pack, asking it who it's
neighbor is, was not successful.
1. Run the test board UUCSS test separately for each EI endpoint on this
2100 ABORT System resources required to run this test are not available.
1. Run the test board UUCSS test separately for each EI endpoint on this
2500 ABORT Internal system error
1. Run the test board UUCSS test separately for each EI endpoint on this
1033 FAIL The EI circuit pack under test cannot make contact with opposite end EI or SNI
circuit pack.
1. Run the test board UUCSS test separately for each EI endpoint on this
2027 FAIL The EI circuit pack has contact with the opposite EI or SNI circuit pack, but it is
the incorrect EI or SNI circuit pack.
1. Run the test board UUCSS test separately for each EI endpoint on this
8-836 Issue 1 May 2002
fiber link and follow the procedures for this test in
Interface Circuit Pack)''.
fiber link and follow the procedures for this test in
Interface Circuit Pack)''.
fiber link and follow the procedures in
Circuit Pack)''.
fiber link and follow the procedures in
Circuit Pack)''.
fiber link and follow the procedures in
Circuit Pack)''.
fiber link and follow the procedures in
Circuit Pack)''.
''EXP-INTF (Expansion
''EXP-INTF (Expansion
''EXP-INTF (Expansion Interface
''EXP-INTF (Expansion Interface
''EXP-INTF (Expansion Interface
''EXP-INTF (Expansion Interface
Continued on next page
555-233-143