Avaya IP 600 Configuration Note

U C C /
A v a y a o n e - X S p e e c h
S e r v e r
With E1 Q.SIG integration,
the pathway between the
IP600/G3 and the UCC /
Avaya one-X Speech server
transmits both call data
information and voice
communications
Configuration Note 3603
UCC / Avaya one-X Speech
Avaya IP 600/G3/S8700/S8300 –E1 QSIG
Central Office
Digital Trunks
AVAYA
G3/G600/S8700/S8300
1.0 METHOD OF INTEGRATION
Each circuit provides 30 Bearer channels plus a 2 Data channels (30B + 2D) Q.SIG
in an E1 format between the IP600 / G3 and the UCC / Avaya one-X Speech server.
Transmission of voice communications is performed over the 30 Bearer channels,
with call information transmitted over the Data channel. An RJ-48C cable (pinout
diagram provided) provides the pathway from the Avaya IP 600 or G3 switch to the
Natural Micro Systems NMS AG4000
card within the Avaya Speech server. Subscribers will be prompted for their account
number and password to gain access to the speech server.
1
AG4000 or AG4040 voice cards must have 8 DSPs per T1 or E1 span (1 DSP equals 100 MIPS, so 8 DSPs would
provide 800 MIPS). For example: An AG4000-2E1/1600 (1600 MIPS) support 2 E1 spans or 60 channels, the
AG4040-TE/1600 supports 2 T1 or E1 spans with 46 or 60 channels respectively.
Note: The AG4000 cards are manufactured to support T1 or E1 spans, the AG4040 and CG6060 card are
software configurable for use with either T1 or E1 spans.
Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA experience configuring its systems. These notes cannot
anticipate every configuration possibility given the inherent variations in all hardware and software products. Please understand that you may
experience a problem not detailed in a Configuration Note. If so, please notify the Technical Assistance Center at 408.953.1822, and if
appropriate we will include it in our next revision. AVAYA accepts no responsibility for errors or omissions contained herein.
– Rev. K (2/09)
UCC SPEECH
ACCESS SERVER
VOICE PORTS
MESSAGE SERVER
Telephone
Telephone
1
/AG4040
Ethernet
MICROSOFT
EXCHANGE SERVER
1
, or CG6060\16-2L\2TE
2
voice