Avaya S8700 Maintenance Manual page 1097

BRI-SET, ASAI-ADJ, BRI-DAT
Table 8-157. Test #628 BRI XID — Continued
Error Test
Code Result Description / Recommendation
2000 FAIL The XID-RESPONSE message was not received from the endpoint.
1. Consult the endpoint's documentation to determine whether layer-2 XID
2. If the endpoint supports these layer-2 messages and the test continues to
3. If the test continues to fail, escalate the problem.
PASS The switch can successfully pass messages over the D channel to the BRI
endpoint.
555-233-143
and XID-RESPONSE messages are supported. If the documentation
reflects no support for these messages, change XID Testing? field to "no"
using the change station extension command.
fail, assume the endpoint is defective and replace it.
Continued on next page
Issue 1 May 2002 8-375