Avaya S8700 Maintenance Manual page 1449

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

E-DIG-STA (Emulated Digital Line)

Hardware Error Log Entries and

Test to Clear Values

Table 8-282. Digital Line Error Log Entries - E-DIG-STA

Associated Test

busyout port

Voice and Control Local

Loop test (#13)

NPE Crosstalk test (#9)

Run the short test sequence first. If every test passes, run the long test sequence. Refer to each appropriate test's

description, and follow its recommended procedures.

Major alarms may be downgraded to Warning alarms based on the value used in the set options command.

a. Maintenance personnel have busied out the port in question. Make sure

that the port is released from busyout by using the release port UUCSSpp

b. The circuit pack has been removed or has been insane for more than

21 minutes. To clear the error, reinsert or replace the circuit pack.

c. Problems transmitting to the voice terminal. This problem can be caused

by defective wiring that can cause varying degrees of problems on different

types of sets. Sets such as the 7410 appear to be more susceptible to

wiring problems than others.

Issue 1 May 2002

Test to Clear Value

test port UUCSSpp sh r 1

rel port UUCSSpp

test port UUCSSpp sh

test port UUCSSpp l r 3

Continued on next page

Troubleshooting