Ext-Dev Admin? Y (External Device Alarm) - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

EXT-DEV ADMIN? Y (External Device Alarm)

EXT-DEV ADMIN? Y (External Device

MO's Name (in

UU is a cabinet number determined in the

Use this MO when the External Device Alarm Admin? field on the change

system-parameters customer-options form is set to (y). You must have

INADS or INIT login permissions to administer EXT-DEV Alarm.

Each PN's Maintenance circuit pack has two alarm ports that connect to such

external devices as uninterruptible power supplies (UPSs) or adjuncts (e.g.,

Certain conditions on the external device close the contacts on the alarm leads to

notify the switch that in turn originates an EXT-DEV alarm. One set of leads

generates a major alarm; the other set generates a minor alarm.

The special locations UUmajor and UUminor are used to designate the major or

minor Maintenance board's alarm connection for cabinet UU. The major/minor

designation specifies the port, not the alarm level associated with the connection;

for example, the "major" port can be administered as a major, minor, or warning

alarm, and the "minor" port can be administered as a major, minor, or warning

alarm. In addition Analog line ports can also be administered as external device

An unadministered Maintenance board's external device alarm port, that is

sensing a contact closure will have an entry in the Error Log and in the

Alarm Log. The alarm receiver will not receive warning alarms.

Initial SAT Command to Run

test eda-external-device-alrm

physical-location

test eda-external-device-alrm

physical location

test eda-external-device-alrm

physical-location

field of the Alarm or Error Log.

Full Name of MO

External Device Alarm

Issue 1 May 2002