Avaya S8700 Maintenance Manual page 1569

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

FIBER-LK (Fiber Link)
Table 8-328. Test #759 Configuration Audit — Continued
Error
Test
Code
Result
Description / Recommendation
108
FAIL
The SNI circuit pack (Endpoint 1) cannot communicate with the equipped SNI
in slot 8. (The list fiber-link command displays a fiber link's endpoints.)
1. Perform the
2. If the SNI being tested has SNI-PEER Error Type 1537, replace the SNI
3. If the SNI being tested still has SNI-PEER Error Type 1537, replace the
109
FAIL
The SNI circuit pack (Endpoint 1) cannot communicate with the equipped SNI
in slot 9. (The list fiber-link command displays a fiber link's endpoints.)
1. Perform the
2. If the SNI being tested has SNI-PEER Error Type 1793, replace the SNI
3. If the SNI being tested still has SNI-PEER Error Type 1793, replace the
112
FAIL
The SNI circuit pack (Endpoint 1) cannot communicate with the active SNC.
(The list fiber-link command displays a fiber link's endpoints.)
1. Check the error log for other SNI circuit packs in the same carrier with a
2. Replace this SNI.
3. Replace the active SNC in the same switch node carrier.
555-233-143
''Fault Isolation for Fiber Links'' on page
resolve multiple SNI-PEER errors.
being tested. (Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure to replace an SNI.) To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
SNI in slot 8.
''Fault Isolation for Fiber Links'' on page
resolve multiple SNI-PEER errors.
being tested. (Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure to replace an SNI.) To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
SNI in slot 9.
257 SNI-BD error. Use display errors with category PNC to view SNI-BD
errors. If other SNI circuit packs in the same switch node carrier have
Error 257, then replace the active SNC in this switch node carrier.
Replacing an SNC may be service interrupting. Refer to the SNC-BD
section for the procedure for replacing an SNC.
4-19. This should
4-19. This should
Continued on next page
Issue 1 May 2002
8-847

Advertisement

Table of Contents
loading

Table of Contents