Avaya S8700 Maintenance Manual page 873

ASAI-EPT
Table 8-57. ASAI Cause Values — Continued
Code Explanation
34 No circuit or
channel
available
40 Resources not
available.
50 Requested
facility not
subscribed
58 Bearer
capability not
currently
available
555-233-143
Recommendation
A resource on the switch is unavailable for a call. For BRI endpoints,
this cause value is not logged. For ASAI, this condition means that
there are no available trunks for an outgoing call request.
1. Verify that the adjunct is administered to support the trunk
capabilities of the switch.
2. Investigate trunk-group status by issuing the status trunk
command from the SAT or by requesting trunk-group queries from
the adjunct.
3. Perform trunk diagnostic procedures outlined in this manual.
No available internal resources to service switch or adjunct request.
Exceeds system transaction capacity for adjunct or switch.
1. May require re-engineering of adjunct services.
Requested facility is implemented, but not administered. Potential
administration problem with endpoint or adjunct.
For BRI endpoints:
1. Verify the switch administration of endpoint using either the display
station or display data-module commands.
2. If step 1 does not resolve the problem, refer to the endpoint's
service manual and verify administration on the endpoint.
For ASAI adjuncts:
1. Display the Customer Optional Features Form (administration
screen) on the switch to determine which ASAI capabilities are
turned on in the switch.
2. Verify that the adjunct is administered to support the identical
capabilities as the switch. If there is a mismatch in the administered
capabilities, then re-administer the switch and/or the adjunct to
establish a consistent set of desired capabilities on both the switch
and the adjunct.
Requested bearer capability is implemented, but not administered. No
B channel is administered. See code 50 above.
Continued on next page
Issue 1 May 2002 8-151