Avaya S8700 Maintenance Manual page 959

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

ATM-NTWK (ATM Network Error)

Table 8-99. Error codes and Aux data values ATM-NTWK

Cause Codes Description

ATM Impaired Paths

1. Examine the error log (display errors), atm setup-events log (list

2. After entering the above command, note the time stamps shown in the list

3. After verifying that every associated ATM endpoint is operating correctly,

System wide ATM Impaired Paths.

See the suggestions listed above to trouble shoot these errors.

ATM CLP (Cell Loss Priority) Bit Errors

ATM Congestion Bit Errors

ATM Cell Underrun Errors

ATM Cell Overrun Errors

ATM Lost Cells

measurements atm svc-setup), and atm pnc-latency (list

measurements atm latency) screens to help diagnose the problem —

although the switch could be operating normally. In this case, you should

consider raising the Activation threshold and/or increasing the Timeout

value on the ATM-RELATED System Parameters screen. (change

system atm).

You can use the list measurements atm svc-setup command to provide

information about errors associated with connection numbers.

measurements atm setup-events screen. Execute the above command

periodically and note the time stamps. If the time stamps have changed

for a particular From Conn-To Conn pair, this indicates there are still setup

failures/delays for that connection.

and if errors are still occurring, contact your local service provider.

Continued on next page

Issue 1 May 2002

Troubleshooting