Avaya S8700 Maintenance Manual page 1611

H323-BCH (H.323 B Channel)
Note:
a. Error Type 18—Indicates that this specific H323 trunk group member has
been craft busied-out.
System Technician Commands
The following commands are available to the system technician:
busyout port UUCSSpp – This command on a specific H.323 B channel
drops any active call that may exist on that B channel and effectively
reduces the trunk group's capacity by one. No physical piece of hardware
is removed from service.
release port UUCSSpp – This command on a specific H.323 B channel
effectively increases the trunk group's capacity by one. No physical piece
of hardware is actually added to service.
status trunk grp/mbr – This command is used to find the current status of
the specific B channel. Additional status for an H.323 B channel shows
near- and far-end IP signaling addresses, near- and far-end H.245
addresses, tunneling status, call-reference value for an active call, and the
H.323 conference ID.
test port UUCSSpp – This command results in the message No tests
applicable to this object.
555-233-143 Issue 1 May 2002 8-889