Test Link - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance Commands

test link

test link link# [short | long] [repeat# | clear] [schedule]

This command verifies that the specified link is administered and performs a

series of tests on the link.

Each link is identified by a number (1-16) assigned on the Communication-Interface

Links form. Display communication-interface links shows the location and

identification of each link.

The following display shows a typical result when test link 1 long is entered for

an S8700 IP Connect system.

test link 1 long

Command successfully completed

Field Descriptions

The location of the port on an Ethernet circuit pack associated with the link being tested.

Issue 1 May 2002

Maintenance Name Alt. Name Test No. Result

TEST RESULTS