Test Environment - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance Commands

test environment

test environment UU [short | long] [repeat# | clear] [schedule]

The test environment command performs hardware diagnostic tests of the

environment monitoring and control, and emergency transfer functions of a

specified cabinet. This command tests EPN cabinets. Circuit packs involved are

the EPN's Maintenance and Tone-Clock (for the ring generator test).

The long test recycles power on every port circuit pack carrier and is

destructive. It does not recycle power on active or standby EPN control or

switch node carriers. When a port carrier is recycled, all service and links to

ports on the carrier are dropped. If a carrier containing an active EI or

Tone-Clock is recycled, all service to that cabinet will be disrupted.

There are 10 Maintenance Objects involved in this test:

Note that although the CUST-ALARM maintenance object is part of the

environment functionality, it is not actually tested using the 'test maintenance'

command. See 'test customer-alarm' for details on testing this particular MO.

A new MO, RMC-ENV, displays when the rack mount cabinet is used for the

S8700 IP Connect.

Issue 1 May 2002