Avaya S8700 Maintenance Manual page 696

Maintenance Commands
Background?
Failures?
All-ports?
TN# Description
TN413 Digital Line [G3r V2]
TN417 Auxiliary Trunk [G3r V2]
TN429 DIOD Trunk [G3r V2]
TN436 DID Trunk [G3r V2]
TN437 Tie Trunk [G3r V2]
TN438 Central Office Trunk [G3r V2]
TN439 Tie Trunk [G3r V2]
TN447 Central Office Trunk [G3r V2]
TN458 Tie Trunk [G3r V2]
TN459 DID Trunk [G3r V2]
TN465 Central Office Trunk [G3r V2]
TN467 8-Port Analog line [G3r V2]
TN468 16-Port Analog line [G3r V2]
TN479 16-Port Analog line [G3r V2]
TN497 Tie Trunk [G3r V2]
TN556 ISDN-BRI Line
TN735 MET Line
TN742 8-Port Analog Line
TN746 16-Port Analog line
TN747B Central Office Trunk
7-440 Issue 1 May 2002
Specifying y causes the tests to run in the background, freeing up the
terminal for other tasks. Error results are logged in the error log but not
displayed on the screen. This option is incompatible with the auto-page
and "continuously" options.
Specifying y causes only failure results to be displayed on the screen.
Specifying y causes testing of all customer-translated line and trunk ports
and, for the following circuit packs, untranslated ports as well:
TN#
TN753
TN754
TN754
TN760C
TN762
TN762B
TN763C
TN769
TN784
TN785
TN2135
TN2136
TN2138
TN2139
TN2140
TN2144
TN2146
TN2147
TN2149
TN2180
TN2312
Description
Direct-Inward-Dial Trunk
Digital Line
Digital Line
Tie Trunk
Hybrid Line
Data Line
Auxiliary Trunk
Analog Line with Message Waiting
Digital Line
16-Port Analog Line
Italian 16-Port Analog Line [G3r V2]
Digital Line [G3r V2]
Central Office Trunk [G3r V2]
Direct Inward Dialing Trunk [G3r V2]
Tie Trunk [G3r V2]
Analog Line [G3r V2]
Direct Inward Dialing Trunk [G3r V2]
Central Office Trunk [G3r V2]
Analog Line [G3r V2]
16-Port Analog line [G3r V2]
IPSI
555-233-143