test firmware download
test firmware download
test firmware download
This command runs a series of demand maintenance tests on all hardware in a
specified group: a carrier, cabinet, port network, PNC (A or B), circuit pack or the
entire system. When this command is executed, the tests that are run vary
depending on the options chosen and types of hardware in the group. Some tests
are run concurrently to speed execution, so test results for several maintenance
objects may be intermixed.
Output
The following shows sample results on an S8700 IP Connect system.
test firmware download
No active alarms
Command:
555-233-143
Issue 1 May 2002
7-437