Test Maintenance - Avaya S8700 Maintenance Manual

Maintenance Commands

test maintenance

test maintenance [C] [short | long] [repeat# | clear] [schedule]
NOTE:
This command is not valid for S8700 IP Connect configurations.
The test maintenance command performs hardware diagnostic tests on the PN's
Maintenance circuit packs.
For a PN's Maintenance circuit pack, the MT interface, EI link, reset, and sanity
functions are tested. The long test resets the PN's Maintenance circuit pack,
causing a local login via the Maintenance board to drop.
The optional parameter C specifies a cabinet. The cabinet number defaults to 1.
Output
The following display shows a typical result when test maintenance 2 is entered.
test maintenance 2
Port
02A
02A
02A
02A
02A
Command successfully completed
7-448 Issue 1 May 2002
Maintenance Name Alt.
MAINT
MAINT
MAINT
MAINT
MAINT
TEST RESULTS
Name Test No. Result
106 PASS
229 PASS
303 PASS
854 PASS
337 PASS
Error Code
555-233-143