Debug Ipv6 Rip - Allied Telesis x310-26FT Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
6
DEBUG IPV RIP

debug ipv6 rip

Overview Use this command to enable RIPng debugging and specify debugging for RIPng
events, RIPng packets, or RIPng communication with NSM processes.
Use the no variant of this command to disable RIPng debugging.
Syntax debug ipv6 rip [all|events|nsm|packet [detail]|recv
[detail]|send [detail]]
no debug ipv6 rip [all|events|nsm|packet [detail]|recv
[detail]|send [detail]]
Default RIPng debugging is disabled by default.
Mode Privileged Exec and Global Configuration
awplus#
Example
awplus#
awplus#
Related undebug ipv6 rip
Commands
C613-50103-01 REV A
Parameter Description
all
Displays all RIPng debugging showing RIPng events debug
information, RIPng received packets information, and RIPng sent
packets information.
events
Displays RIPng events debug information.
nsm
Displays RIPng and NSM communication.
packet
Displays RIPng packets only.
recv
Displays information for received packets.
send
Displays information for sent packets.
detail
Displays detailed information for the sent or received packet.
debug ipv6 rip events
debug ipv6 rip packet send detail
debug ipv6 rip nsm
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
838